Murco | Drywall Joint Compound, Texture, Material, Mud

Murco’s full line of Joint Compounds and Texture Materials provide easy workability and good crack resistance, with bonding properties that are retained even under the worst conditions. Available in ready-mixed formulation and drying-type powder that mixes easily with water, these joint compounds will help you in every construction situation, whether it’s for commercial or residential application.

*All Murco Wall Products’ compounds and texture materials meet ASTM C475.

		M1200, M500, M700, M710 – Drywall Joint Compound M1200, M500, M700 and M710 are Murco’s ready-mixed formulas used to embed tape, finish joints, and texture gypsum wallboard. And because factory mixing eliminates problems normally associated with job-mixed dry products, this line provides excellent slip and workability. M1200, M500, M700 and M710 are available in heavy, medium and machine consistency.
		HI-SET Setting Compound HI-SET is a fast-setting, easy-sanding joint compound. It may be used for all operations preceding the final coat in finishing joints, concealing nail heads and corner bead in gypsum wall board construction. Designed to set-up even under the worst conditions, HI-SET is known to have superior adhesion and virtually no shrinkage.
		Sure Strength Sure Strength is a super hard, fast-setting, chemically hardened joint compound. It may be used for all operations preceding the final coat in finishing joints, hiding nail heads and corner bead in gypsum wall board construction. Designed to set-up under the worst drying conditions, Sure Strength also has superior adhesion and virtually no shrinkage. Because of its extremely hard set, it is ideal for taping manufactured homes which often crack joints during transport.
		M1700, M1100, X47 M1700, M1100 and X47 are powdered, non-aggregated texture products that can be easily mixed with water to achieve desired texture, and can be thinned to yield thin, medium, and heavy textures. Designed for interior walls and ceilings that are to be painted, its excellent coverage can be used to conceal minor surface defects.
		M101, M1000 Aggregated Texture M1000 Ceiling Texture impeccably covers over concrete ceilings, and provides maximum concealment over gypsum wallboard, joints and dimples. This is available in fine, medium or coarse, in 35lb. bag/50 per pallet. For reliable ceiling texture to meet all your construction needs, M1000′s high-quality materials and adhesive qualities provide years of beautiful coverage. M101 – A powder product with a perlite aggregate which produces a sand like texture. Designed for use on interior walls and ceilings. Can be used on gypsum panels, wood, concrete and plaster. This product is designed to be painted.
		M300 M300 is a powdered non-aggregated texture and joint cement that can be easily mixed with water to achieve desired texturing and taping consistency. It conceals minor surface defects perfectly, and is designed for interior walls and ceilings that are to be painted over.
		M600 Spray Texture M600 Spray Texture is a pre-mixed formulation that gives many mechanical spray effects over gypsum wallboard. To use, apply in light orange peel coat, or splatter on and knock down with trowel. M600 Spray Texture is available in 50lb. box/48 per pallet.